ZCT403 PCB mounting zero phase sequence current transformer

Electrical Specification

(Customized is available)

The three-phase wire on the primary side of the zero-sequence current transformer passes through the iron core, and the secondary coil is wound on the iron core. Under normal circumstances, because the three-phase current on the primary side of the zero-sequence current transformer is symmetrical, the vector sum is zero, no magnetic flux is generated in the iron core, and there is no current in the secondary coil.
When a single-phase ground fault occurs in the system, the sum of the three-phase currents is not zero, and a zero-sequence magnetic flux appears in the iron core, which induces a potential on the secondary coil, and the secondary current flows through the relay to make it act.

The zero-sequence current transformer is used to detect trace amounts and detect whether there is leakage. How does the zero-sequence current transformer send an action signal so that the actuator can execute it, and does it have an output contact? The zero-sequence current transformer itself has no output contact and must be used in conjunction with the leakage protection relay.

Item	Rated Current(A)	Output Voltage Vo(mv)	Test Conditions	Over Leakage Characterstics	Temperature Characteristics -35~80℃	Dimensions (mm)
Click PN For Details						ID	OD	HT
ZCT201	30	4-5.1	lin=10mA RL=510	-10%~0%	10%Max	5.9	16	6.5
ZCT202	30	5.1-6	lin=8mA RL=750	-10%~0%	10%Max	5.8	15.2	6.1
ZCT203	50	17-21	lin=22.5mA RL=1k	-10%~0%	10%Max	9.2	21	7.3
ZCT204	30	12-15	lin=22.5mA RL=1k	-10%~0%	10%Max	9.8	20.6	6.5
ZCT205	30	12.5-15.5	lin=8mA RL=4.7k	-10%~0%	10%Max	9.3	21.3	7.2
ZCT206	50	17-21	lin=22.5mA RL=1k	-10%~0%	10%Max	12.3	26	10
ZCT207	30	7.5-8.5	lin=25mA RL=1k	-10%~0%	10%Max	15.4	29.8	10
ZCT208	60	10.2-12.5	lin=20mA RL=680	-10%~0%	10%Max	7.2	19.4	7.7
ZCT209	50	8-11.2	lin=11.25mA RL=1k	-10%~0%	10%Max	7	17.2	7
ZCT210	50	8-11.2	lin=11.25mA RL=1k	-10%~0%	10%Max	6.8	16.9	7.9
ZCT211	50	8-11.2	lin=11.25mA RL=1k	-10%~0%	10%Max	10.6	25.4	8
ZCT212	60	10.2-12.5	lin=20mA RL=680	-10%~0%	10%Max	11	23.5	8
ZCT213	60	≥300	lin=25mA RL=1k	-10%~0%	10%Max	9.4	23.8	12.7
ZCT218	60	10.2--12.5	lin=25mA RL=680	-10%~0%	10%Max	7.5	18.9	7.6
ZCT220	60	≥300	lin=25mA RL=47k	-10%~0%	10%Max	10.1	24	11.5
ZCT225	60	≥300	lin=25mA RL=47k	-10%~0%	10%Max	10.9	25.5	9
ZCT401	100	17-21	lin=22.5mA RL=1k	-10%~0%	10%Max	15	29.2	10
ZCT402	100	6.3-7.5	lin=20mA RL=370	-10%~0%	10%Max	17.5	35.9	8.8
ZCT403	250	17-21	lin=22.5mA,RL=1k	-10%~0%	10%Max	29	51	12
ZCT404	250	17-21	lin=22.5mA,RL=1k	-10%~0%	10%Max	32	55.6	12
ZCT405	250	17-21	lin=22.5mA,RL=1k	-10%~0%	10%Max	42	80*69	20
ZCT406	630	17-21	lin=25mA,RL=1k	-10%~0%	10%Max	51.3	84	26
ZCT407	800	17-21	lin=22.5mA,RL=1k	-10%~0%	10%Max	51	96*89	23
ZCT408	100	125-150	lin=500mA,RL=150	-10%~0%	10%Max	19	36	11.5
ZCT409	225	125-150	lin=500mA,RL=150	-10%~0%	10%Max	24	42	12
ZCT410	400	125-150	lin=500mA,RL=150	-10%~0%	10%Max	43	90*74	16
ZCT411	800	120-151	lin=500mA,RL=150	-10%~0%	10%Max	53	96*89	23