ZCT538 PCB Mounting Zero phase current transformer Electrical Specification (Customized is available) Rated Current 30A DC Resistance at 25℃ 35-48Ω Dielectric Withstanding Voltage(Hi-pot) 2500Vrms Output Voltage Vo 3.6~3.8μA The zero phase current transformer is a line fault current monitor. Generally, there is only one iron core and secondary winding. When using, the primary three core cable is passed through the…
ZCT526 zero sequence current transformer principle Electrical Specification (Customized is available) Rated Current 30A DC Resistance at 25℃ 36±5Ω Dielectric Withstanding Voltage(Hi-pot) 2500Vrms Output Voltage Vo 60-90mV When a single phase grounding fault occurs in the primary line, an unbalanced current (meaning zero phase current) is generated in the primary circuit, and a tiny current is induced in the secondary…
ZCT503 Pin type zero phase current transformer supplier Electrical Specification (Customized is available) Rated Current 30A DC Resistance at 25℃ 40±5Ω Dielectric Withstanding Voltage(Hi-pot) 3000Vrms Output Voltage Vo 7.5-8.5mV The basic principle is the same as that of ordinary transformers. The main differences are:
The CT315 600A Split Core Current Transformer, operating at 50~60Hz and withstanding up to 2000Vrms, is designed for electricity power measuring. It features a PC/ABS alloy shell, oriented cold-rolled silicon steel core, and high-strength enameled wire. The transformer is structured for both cable and copper bar installations and ensures accurate measurement with a maximum linearity error of 1%.
The CT304 Split core current transformer operates within a 50Hz~60Hz frequency band and can handle a maximum of 40A current at 20Ω. It’s designed for efficient energy monitoring and automation applications, suitable for sub-metering and peak load analysis. Its compact split-core design allows easy, non-disruptive installation for metering applications.
CT313 split core current transformer manufacturers offer a customizable electrical device for 50Hz~60Hz frequency bands. Key specs include a dielectric strength of 3000Vrms for 2 seconds, a rated current of 50A, and a maximum of 120A, with a rated load resistor of 10Ω. It maintains linearity error within 1%.
