[vc_row][vc_column][vc_column_text]A Rogowski coil is an electrical device for measuring alternating current (AC) or high-speed current pulses. It consists of a helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil. The whole assembly is then wrapped around the straight conductor whose current is to be measured. There is no metal (iron) core. The winding density, the diameter of the coil and the rigidity of the winding are critical for preserving immunity to external fields and low sensitivity to the positioning of the measured conductor.
Rogowski loops are simple and reliable inductive sensors that measure the net current through the cross-section of the loop. They can be highly accurate and insensitive to currents in nearby conductors provided they are sufficiently uniform. There are many successful applications inscience and industry.
The feature of Zentar® Rogowski Coils
电气特性 Electrical properties
使用频率 Frequency band : 100KHz
耐压强度 Dielectric strenght: 3000Vrms/2 seconds
额定一次电流 Rated primary current: 2000A 50Hz
额定二次电流 Rated Secondary Current50mA 50Hz
饱和电流 Saturation current: ≥250A 50Hz
使用温度 Operate temperature -30~60℃ 0~80%RH
储存温度 Store temperature -35-80℃ 0-80%RH
Output Voltage Vo from Rpwgowski coil; 0- 0.01V
Output Voltage Vo from integrator: 0- 0.333V
积分器 Integrator
We select the OP-Amplifier whose noise and drift are very low.
安装说明 Installation specitication
1 Before the installation must ensure that the primary is no current status
2 Correct mouting of the CT is assured by a distinct sound of a click~
3 When Install CTs into circuit box, the circuit box’s main breaker should be turned off to perform.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]